Matco Tools MPTL144DD Instrucciones De Operación página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MPTL144DD 3/8"
MPTL192DD 1/2"
How to Replace the Chuck
1. Hold "A" ring firmly and turn "B" ring counterclockwise until the chuck is fully open.
2. Release the left-hand screw inside the chuck.
Maintenance
Remove the battery from the unit and pull power socket of charger from power outlet before repair
or maintenance.
1. Wipe plastic parts with a soft cloth lightly dampened with water. Do not wipe plastic parts with solvents such
as gasoline, thinner, or alcohol.
2. Check the screws in the main housing regularly and tighten if necessary.
3. Keep children away from the tool. Do not expose the tool to rain.
4. Do not lock the drill for more than 5 seconds while trigger is engaged. Extended periods of locking the drill
may damage the motor and increase heat rapidly.
5. Do not change the High/Low speed knob while the drill is running to avoid damaging the gear
mechanism.
MPTL144DD/MPTL192DD
14.4V DRILL AND DRIVER WITH LED LIGHT
19.2V DRILL AND DRIVER WITH LED LIGHT
6
B A
Left-hand screw
08/30/06

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mptl192dd

Tabla de contenido