Campbell Hausfeld WS0970 Manual De Instrucciones Y Lista De Repuestos página 7

M o d e l WS0970 and WS0990
Welding Guidelines
( C o n t i n u e d )
WELD PASSES
Sometimes more then one pass is
necessary to fill the joint. The root pass
is first, followed by filler passes and the
cover pass (See Figure 10). If the pieces
are thick, it may be necessary to bevel
the edges that are joined at a 60º
angle. Remember to remove the slag
between each pass.
Cover
Filler
Root
Figure 10 - Weld Passes
Figure 11 - Multiple Weld Passes
w w w . c h p o w e r . c o m
7