Publicidad
Idiomas disponibles
Idiomas disponibles
5-Port Gigabit PoE+ Switch
This guide presents the basic steps to set up and operate this device. For detailed
instructions and specifications, refer to the user manual enclosed with this product or at
intellinetnetwork.com.
Placement
Prior to use, place/position the switch:
• On a level surface that can support the weight of the switch (and any other items that
need to be considered);
• With a minimum of 25 mm (approx. 1") of clearance on the top and sides
for adequate ventilation;
• Away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• Where it cannot be affected by excessive moisture.
Connections
All ports on the switch support Auto-MDI/MDI-X functionality, so you can use straight or
crossover UTP/STP cables to connect the RJ45 ports to PCs, routers, hubs, other switches,
etc.
LED
Status
PWR
On
Off
1 - 5
On
Blinking
Off
PoE
On
Off
MAX
On
Blinking
Off
• The LED indicators make monitoring and troubleshooting easier. If a status LED
doesn't indicate a link or activity, check the corresponding device for proper setup and
operation.
• Use the included power adapter (51 VDC) to connect the receptacle on the back of the
switch to a power outlet, and confirm that the Power LED lights.
2
English
Operation
Power On
Check connection; turn power on
Valid port connection
Data transmitted/received
No link established
Port is linked to PSE/PoE device
No PSE/PoE device is linked
The system has reached a total power output of 55 W. The PoE
total is nearing its maximum level.
The power is not enough to supply PoE devices.
The system is using less than 55 W.
English
Publicidad
