Getting Ready - Logitech ClickSmart 510 Manual Del Usuario

Getting Ready

1. Insert the four AAA alkaline camera batteries.
2. Insert the Smart Media
card slot. Push the card all the way in and close the door.
(To remove the memory card, open the door and press
on the card to eject it.)
®
3. Install the Logitech camera software using
your computer's CD-ROM drive. Follow the on-screen
instructions.
Taking Pictures and Videos
1. Press and hold the On/off button for one second
to turn on the camera. The camera is ready to take
a digital picture.
2. To change any of the camera's options (e.g., camera
mode, resolution, timer, etc.), cycle through the options
on the status display by pressing the Mode button.
The icon of the active option will flash. Change it by
pressing the Select button.
3. When not in use, the camera turns itself off after
60 seconds to conserve battery power.
4. To switch the camera off, press and hold the On/
off button for one second.
2
™
memory card into the memory
Slide cover to open