Getting Ready - Logitech QuickCam ClickSmart 420 Manual Del Usuario

2

Getting Ready

1. Insert the four AAA alkaline camera batteries.
2. Insert the wrist strap and lens cap.
®
3. Install the Logitech camera software using your computer's CD-ROM drive.
Follow the on-screen instructions.
3
Taking Pictures and Videos
1. Press and hold the Power button for one second to turn on the camera.
2. To take a picture, set the Picture/Video switch to "Picture."
Then press the Shutter button to take a picture. If the lens cap is left on,
the Lens Cap display icon will blink.
3. For videos, set the Picture/Video switch to "Video." Then press and hold
the Shutter button to take a video. The Video LED blinks to indicate
the camera is recording.
(This LED will blink more rapidly when the camera begins to run out of
memory.) Release the Shutter button to stop recording. When not in use,
the camera turns itself off after two minutes to conserve battery power.
To switch the camera off, press the Power button.
2
English