Tecnical Specifications; Connection And Indications - WEG K-PT100 Guia De Instalacion

K-PT100 Temperature Transducer Kit Installation Guide

2. TECNICAL SPECIFICATIONS

2.1 Connection and Indications

PT100-1
PT100-2
PT100-3
PT100-4
PT100-5
Table 1 - Electrical specifications of the PT100 inputs
Temperature
Indications
Isolation
Error and alarm levels
Standard
(1) Refer to the SSW-06 user manual for parameter numbers and further details
6
X4
Channel 1A – Current
1 C1A
source for the sensor 1
2 C1B Channel 1B – Sensor 1 input
Channel 1C – 0 V reference
3 C1C
for the sensor inputs
Channel 2A – Current
4 C2A
source for the sensor 2
5 C2B Channel 2B – Sensor 2 input
Channel 2C – 0 V reference
6 C2C
for the sensor inputs
Channel 3A – Current
7 C3A
source for the sensor 3
8 C3B Channel 3B – Sensor 3 input
Channel 3C – 0 V reference
9 C3C
for the sensor inputs
Channel 4A – Current
10 C4A
source for the sensor 4
11 C4B Channel 4B – Sensor 4 input
Channel 4C – 0 V reference
12 C4C
for the sensor inputs
Channel 5A – Current
13 C5A
source for the sensor 5
14 C5B Channel 5B – Sensor 5 input
Channel 5C – 0 V reference
15 C5C
for the sensor inputs
16 NC
Figure 3 - PT106 board XC4 terminal trip
Range
(1)
Resolution
Accuracy
(1)
Function
2 to 2.5 mA
0 to 0.5 Vdc
Isolated from the
SSW-06 ground
2 to 2.5 mA
0 to 0.5 Vdc
Isolated from the
SSW-06 ground
2 to 2.5 mA
0 to 0.5 Vdc
Isolated from the
SSW-06 ground
2 to 2.5 mA
0 to 0.5 Vdc
Isolated from the
SSW-06 ground
2 to 2.5 mA
0 to 0.5 Vdc
Isolated from the
SSW-06 ground
-
-20 to 260 C
o
1 C
o
± 3 C
o
1500 Vac / 1 min.
Adjustable through parameters
EN60751
Specification
-