Matco Tools MT2872L Instrucciones De Operación página 2

MT2872L 1.0 HP EXTENDED LENGTH LOW PROFILE CUT-OFF
FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.
THIS INSTRUCTION MAN U AL CON TAINS IM POR TANT
SAFE TY INFORMATION. READ THIS IN STRUC TION
MANUAL CARE FUL LY
IN FOR MA TION BE FORE OP ER AT ING THIS TOOL.
It is the responsibility of the owner to make sure all
personnel read this manual prior to using this air tool.
It is also the responsibility of the air tool owner to keep
this manual intact and in a convenient location for all
to see and read. If the manual or product labels are lost
or not legible, contact Matco Tools for replacements.
If the operator is not fluent in English, the product and
safety instructions shall be read to and discussed
with the operator in the operator's native language by
the purchaser/owner or his designee, making sure
that the operator comprehends its contents.
• Al ways op er ate, in spect and main tain this tool in
ac cor dance with Amer i can Na tion al Stan dards
In sti tute Safe ty Code of Por table Air Tools (ANSI
B186.1) and any oth er ap pli ca ble safe ty codes and
reg u lations.
• For safety, top per for mance and max i mum du ra bil i ty
of parts, op er ate this tool at 90 psig: 6.2 bar max air
pres sure with 3/8" di am e ter air sup ply hose.
• Always wear im pact-re sis tant eye pro tec tion when
op er at ing or per form ing main te nance on this tool
(users and bystanders).
• Al ways wear hear ing pro tec tion when us ing this tool
(users and bystanders). High sound levels can cause
per ma nent hear ing loss. Use hear ing pro tec tion as
rec om mend ed by your em ploy er or OSHA reg u la tion.
• Always wear face and hand protection when
operating this tool (users and bystanders).
• Keep the tool in ef fi cient op er at ing con di tion.
• Operators and main te nance per son nel must be
phys i cal ly able to han dle the bulk, weight and pow er
of this tool.
• Air un der pres sure can cause se vere in ju ry. Nev er
di rect air at your self or oth ers. Al ways turn off the air
sup ply, drain hose of air pres sure and de tach tool
from air sup ply be fore in stall ing, re mov ing or
ad just ing any ac ces so ry on this tool, or be fore
per form ing any main te nance on this tool. Fail ure to
do so could re sult in in ju ry. Whip hos es can cause
se ri ous in ju ry. Al ways check for dam aged, frayed or
loose hos es and fit tings, and re place im me di ate ly.
Do not use quick de tach cou plings at tool. See
in struc tions for cor rect set-up on page 4.
• Air powered tools can vi brate during use. Vi bra tion,
re pet i tive mo tions or un com fort able po si tions over
ex tend ed pe ri ods of time may be harm ful to your
hands and arms. Dis con tin ue use of tool if dis com
fort, tin gling feel ing or pain oc curs. Seek med i cal
d vice be fore re sum ing use.
• Slip ping, tripping and or falling while op er at ing air
|tools can be a ma jor cause of se ri ous in ju ry or death.
MT2872L
WARNING
AND UN DER STAND ALL
Be aware of ex cess hose left on the walk ing or work
sur face.
• Keep body work ing stance bal anced and firm.
Do not over reach when op er at ing the tool.
• Anticipate and be alert for sud den chang es in mo tion
dur ing start up and op er a tion of any pow er tool.
• Do not carry tool by the hose. Pro tect the hose
from sharp ob jects and heat.
• Tool shaft may continue to rotate briefly after throttle
is released. Avoid direct contact with accessories
during and after use. Gloves will reduce the risk of
cuts or burns.
• Keep away from rotating end of tool. Do not wear
jewelry or loose clothing. Secure long hair. Scalping
can occur if hair is not kept away from tool and
accessories. Choking can occur if neckwear is not
kept away from tool and accessories.
• Note direction of rotation BEFORE operating tool.
• Use accessories rated at 14,000 RPM or higher.
• Never operate this tool without required disc
RPM RPM RPM
cover/guard in place.
• Do not lock, tape or wire the "on/off" safety lever
in the "on" position, as the lever must be free to
return to the "off" position when released.
• Correct cut-off wheel mounting is necessary to
prevent injury from broken wheels. Do not use
chipped or cracked cut-off wheels. Cut-off wheels
should be a free fit on the spindle to prevent stress
at the hole. Use only wheel collars that come with
the tool for mounting the cut-off wheel. Flat washers
or other adapters may over stress the wheel. Tighten
the wheel on the spindle to prevent spin off when the
tool is turned off.
• Do not use (or modify) the tool for any other purpose
than that for which it was designed without consulting
the manufacturer's authorized representative.
• Do not lu bri cate tools with flam ma ble or vol a tile
liq uids such as ker o sene, die sel or jet fuel.
• This tool is not insulated against electric shock.
• This tool must not be used in explosive atmospheres.
• Servicing and repairs should only be made by an
authorized service center.
• Do not force tool be yond its rat ed capacity.
• Use accessories recommended by Matco Tools.
• Keep tool out of reach of children.
• Do not remove any labels. Re place any damaged
la bels.
• Failure to heed these warnings may result in personal
injury and/or property damage.
2
rev 04/25/18