Battipav Super Pro Evo Manual De Instrucciones página 13

Battipav srl
DIAGONAL CUT
• Loosen the beam bracket's locking knob;
14
• Move the supporting beam bracket to an angle
of 45°
15
• Position the tile to be cut on the work surface
and proceed with cutting as described in the
"PERFORMING THE CUT" paragraph.
TROUBLESHOOTING
THIS TOOL MUST ONLY BE REPAIRED BY TRAINED PERSONNEL.
Repairs must only be carried out by trained personnel, using original spare parts. Any other repairs may put
the user at considerable risk.
Malfunctions not related to a conformity defect that exists at the time of purchase are excluded from the
warranty. Exclusions include:
- Wear of materials (taking into account the average life of the product)
- Failure to comply with the recommendations contained in this manual.
- Maintenance and tampering carried out by unauthorized personnel.
- Use of non-original spare parts.
DISPOSAL
When the entire machine or part there of is disposed
of, the materials are to be disposed of in accordance
with current legislation.
Aluminium
Steel
Aluminium
Polyamide
Steel
13
Worktable
Carriage
Carriage rod
GB
AL
AC
AL
PA
AC