Assembling and Attaching the Steam Mop
ALWAYS attach accessories before turning the unit on.
1
Press down on the lock/release button on the
triangle steam mop and slide the extension wand
onto the steam mop adapter. Press firmly until
button snaps into hole.
Cleaning Pad
Never remove the cleaning pad while the machine is in operation or warm to the touch.
NOTE: To avoid over-saturating the cleaning pad after the SteamMachine has rested for a period of time, you may want
expel built-up water condensation from inside the hose. Remove the cleaning pad, place triangle mop head onto a
towel and trigger the gun for a few seconds. Once the water is discharged, attach cleaning pad and steam as you
normally would.
1
Lay cleaning pad on flat surface with cleaning side
down and hook & loop attachments facing up. The
included blue microfiber pad works best for cleaning
hard floor surfaces.
The triangle steam mop and cleaning pad are perfect for use on these
hard floor surfaces:
• Stained concrete
• Granite
• Linoleum
• Ceramic tile
• Marble
• Vinyl
English
8
C900134.M SteamMachine Elite
2
Press down on the lock/release button on extension
and slide second extension onto first extension.
Press firmly until button snaps into hole.
2
Place triangle steam mop on top of the cleaning pad.
Press steam mop down until attached. Your steam
mop is now ready to clean hard floor surfaces.
• Sealed
hard wood
3
The optional carpet glide attachment works with the
included white pad. The carpet glide can be snapped
onto the steam mop and is great for freshening
carpets and killing dust mites.
WARNING: Do not use on unsealed
hard wood, laminate flooring or
unglazed ceramic surfaces. Surfaces
that are not properly sealed may be
warped or damaged by exposure to
heat and moisture. Always test a small
area before beginning.
www.homeright.com