Infosec X2 LCD TOUCH FR 500 Guia Del Usuario página 10

O P E R A T I N G D I S P L A Y
UPS
Mode
UPS
Power on
AC Mode
Overload
in AC
mode
Battery
Mode
Overload
in battery
mode
7 . I N S T A L L A T I O N A N D O P E R A T I O N
1. Checking
When you receive your equipment, open the packaging and check that your UPS has not
been damaged. Packaging includes: UPS unit and a user guide
(IEC models : 2 IEC output cables for models 500, 700, 1000 & 1250 VA and 3 IEC output
cables for models 1600 & 2000 VA).
In the event of damage, please submit a standard claim to the after-sales service
department.
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
10
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 04 15 AA 59 205 04
LCD
2
4
When AVR is functioning,
icon will flash every
second.
Icon will flash.
7
9
When battery level is low,
icon will flash.
Icon will flash.
When UPS is turned
on, it will enter this
1
mode for 4 seconds.
Information will be
displayed in the
3
following order when
the LCD is touched.
2. Output voltage
5
3. Input voltage
4. Load level
5. Battery capacity
When overload occurs,
the alarm will beep
6
every 0.5 second.
The alarm will beep
every 10 seconds and
8
information will be
displayed in the
following order when
10
touching the LCD
7. Output voltage
8. Input voltage
9. Load level
10. Battery capacity
When overload occurs,
11 the alarm will beep
every 0.5 second.
Description