About Batteries - Infosec X2 LCD TOUCH FR 500 Guia Del Usuario

 In an emergency situation, switch the UPS to the "Off" position and disconnect the
unit from the AC power supply.

When the UPS is out of order, please refer to "section 10: trouble shooting" and
call the hot line.
 Connected products:

Combined UPS and connected equipment leakage current should not exceed
3,5 mA.

Make sure that the connected load does not exceed UPS capabilities. To ensure
improved backup time and longer battery life, we recommend a load equivalent to 1/3 of
nominal power.

Do not leave any recipients containing liquid on or near the UPS.

Do not plug the UPS input into its own output socket.

Do not plug the UPS into a power strip or surge suppressor.

The UPS has been designed for personal computers. It should not be used with
electrical or electronic equipment with inductive loads such as motors or fluorescent
lights.

Do not connect any household appliances such as microwaves, vacuum cleaners,
hair dryers or life-support systems to the UPS.

Use only CEE 7/7 plugs (FR/SCHUKO models)

Due to excessive consumption, laser printers should not be connected to the UPS.
 About batteries:

It is recommended that a qualified technician change the battery.

Do not dispose of the battery in a fire as it may explode.

Do not open or damage the battery! The electrolyte, fundamentally sulphuric acid,
can be toxic and harmful to the skin and eyes. If you come into contact with it, wash
thoroughly with water and clean dirtied clothes.

Do not throw the battery into a fire. It may explode. It has to be disposed of separately
at the end of its useful life. Refer to local legislation and regulations.

The UPS contains one or two large-capacity batteries. To avoid any danger of electric
shock do not open it/them. If a battery needs servicing or has to be replaced, please
contact the distributor.

Servicing should be performed or supervised by competent personnel who take the
necessary precautions. Keep unauthorised personnel away from batteries.

A battery may present a risk of electric shock and cause short circuits. The following
precautions should be taken by the qualified technician:

Remove watches, rings or other metal objects from hands.

Use tools with insulated handles.

Disconnect the charging source prior to connecting or disconnecting battery
terminals.

When replacing batteries, use the same type and number of sealed lead-
acid batteries.
4 . S T O R A G E I N S T R U C T I O N S
The UPS should be stored with its battery fully charged. In the event of long-term storage,
the batteries should be recharged once every 3 months for 24 hours (by plugging the UPS
into the mains power supply and switching "ON") to avoid any deterioration in battery
performance.
Do not keep or use the UPS in any of the following environments:

Any area with combustible gas, corrosive substances or heavy dust.
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 04 15 AA 59 205 04
3