Raychem E-100-L Instrucciones De Instalación página 3

5a
Do not cut bus wires
• Measure exactly
1 3/8 in (35 mm).
• Lightly score
inner jacket
around and down
as shown.
• Peel off jacket.
• Cut and remove
all fiber strands.
• Score and
remove center
spacer.
• Remove any
remaining fiber
material from bus
wires.
XTV, KTV
1 3/8"
(35 mm)
Go to Step 6
5b
BTV, QTVR
Do not cut bus wires
• Measure exactly
1 3/8 in (35 mm).
• Lightly score
inner jacket
around and down
as shown.
• Peel off jacket.
• Notch core.
• Peel bus wire
from core.
• Score core
between bus
wires at inner
jacket.
• Bend and snap
core.
• Peel core from
bus wire.
• Remove any
remaining
core material
from bus wires.
E-100-L Installation Instructions
1 3/8"
(35 mm)
1/4"
(5 mm)
Go to Step 6
3