Battery Installation - Napa CARLYLE DTW38 Instrucciones De Operación

RePlAcING THe HeAD KIT (coNT.)
Step 8: Fasten the lid to the ratchet head with lid screws.
See Fig. 8
Test the functionality by making sure the driver turns and
the switch can pivot in both directions.
BeFoRe uSING THe WReNcH

BATTeRY INSTAllATIoN

• Remove the battery cap.
• Insert two AA batteries (provided) matching the
-/+ polarities of the battery to the battery
compartment.
• Replace the battery cap and fasten it tightly
according to the illustrations.
SeT uP
1. U = Unit of Measure/Setting
2. + = Increase measurement/UP
3. - = Decrease measurement/Down
4. M = Memory Mode
5. C = Clear Value/Return
6. On/Off = Hold for 3 seconds to power off - Hold for 1
second to power on.
DTW38 and DTW12
Fig. 8
1
6
6
2
4
5
3
Rev. 02/27/15