Lcd Display; Button Function - Napa CARLYLE DTW38 Instrucciones De Operación

lcD DISPlAY

• Light: 110%: The Red LED Light & Audible Buzzer Will
Sound – Indicating a Torque Overage Exceeding 104%
of the Target Torque Setting.
100%: The Green LED Light & Audible Buzzer Will
Sound Indicating a Torque Reading of 97%-104% of the
Target Torque Setting
90%: The Yellow LED Light & Audible Buzzer Will Sound
Indicating a Torque Reading of 90%-97% of the Target
Torque Setting.
• LCD Display: CCW: Indicates that the wrench has
taken a measurement in the counter-clockwise direction.
Note: An arrow will be displayed pointing vertically to
the CCW lettering on the face when a measurement is
taken in the CCW rotation. The arrow will also be
present if the memory is accessed for a previous
measurement taken in the CCW rotation.
M: Indicates MEMORY. There are 99 torque
measurement memory storage locations for this
particular wrench.
Ft-Lb/N.M/Kg-Cm/In-Lb: Each unit can be selected by
pressing the "U" key and will be indicated by an arrow
that will point to the unit of measurement the wrench is
currently set in.
Note: In memory mode the arrow will point to the unit of
measurement the reading was taken in.

BuTToN FuNcTIoN

U : Change unit and to enter the desired torque value.
+ : Value increase
- : Value decrease
ON/OFF : Power on/Power off. Press momentarily to set
the wrench to its maximum torque value.
M : Enters memory mode.
C : Clear Angle reading.
DTW38 and DTW12 7 Rev. 02/27/15