Operation
Testing a Patch Cable
1. Connect one end of the cable to the test port on top of the tester.
2. Connect the other end of the cable to the test port on the bottom of the tester.
3. Push the TEST button.
4. The #1 Pass LED will illuminate if the cable has proper continuity.
5. On a faulty cable, the Fail LED will glow red if the cable is shorted or yellow if the
cable is open.
6. If the Pass LED on the cable being tested flashes when the TEST button is pushed,
the batteries are depleted. Discontinue the test and immediately replace the
batteries.
5
Operation
Installing Batteries
1. Push down on latch to remove the battery cover
2. Install 4 LR44 button cell batteries
3. Observe polarity. Note + marking on battery.
4. Install battery cover before using test
Phillips screw
REGISTER YOUR PRODUCT
Register your product purchase at www.southwiretools.com or by scanning the QR code on this
manual. At Southwire, we are dedicated to providing you with the best customer experience. By
following a few quick steps to register, you can experience quicker service, more efficient support,
and receive information on our future products. Simply provide your model number, serial number,
and just a few pieces of information about yourself – it is that quick and easy.
LIMITED WARRANTY AND LIMITATION OF LIABILITY ON SOUTHWIRE METERS & TESTERS
Southwire Company, LLC warrants this product to be free from defects in material and
workmanship for two years from the date of purchase. This warranty does not cover fuses,
disposable batteries, or damage arising from an accident, neglect, misapplication,
contamination, modification, improper maintenance or repair, operation outside of specifications,
or abnormal handling of the product. Southwire's sole liability, and the purchaser's exclusive
remedy, for any breach of this warranty is expressly limited to Southwire's repair or replacement
of the product. Whether Southwire repairs or replaces the product will be a determination that
Southwire makes at its sole discretion. SOUTHWIRE MAKES NO WARRANTY THAT THE
PRODUCT WILL BE MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE.
SOUTHWIRE MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED, OTHER THAN THE
WARRANTY SPECIFICALLY SET FORTH HEREIN. SOUTHWIRE WILL NOT BE LIABLE FOR
ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES FOR
ANY BREACH OF THIS WARRANTY.
This warranty is void if this product is used for rental purposes. No product reseller is authorized
to extend any other warranty on Southwire's behalf relating to this product, and no such reseller
warranty will be binding on Southwire. If you have a warranty claim, or if the product needs to
be serviced during or after the warranty period set forth above, please contact the Customer
Service Department at 855-SWTOOLS (855-798-6657). The sender is responsible for all
shipping, freight, insurance, and packaging costs associated with sending a product to
Southwire. Southwire will not be responsible for lost or damaged products returned pursuant
to this warranty. All products returned to Southwire under this warranty should be mailed to:
Southwire Company, LLC
Attention: Tool Warranty Return
5810 Trade Center Court
Villa Rica, GA 30180-6701
4 x LR44
Battery door
Phillips screw
6