4. Protect fragile / friable periwound skin with additional V.A.C.
Tegaderm™ Dressing, or other similar medical grade transparent film, skin protectant or
hydrocolloid.
NOTE: Depending on region, 3M™ Cavilon™ No Sting Barrier Film may be provided in the
dressing package.
5. Application of the 3M™ Cavilon™ No Sting Barrier Film (if used):
a.
Skin should be clean and dry prior to application of 3M™ Cavilon™ No Sting Barrier
Film.
b.
Use supplied wipe to apply a uniform coating of film over entire area of concern
(Fig. 1).
c.
If an area is missed, reapply to that area only after first application of 3M™ Cavilon™
No Sting Barrier Film has dried (approximately 30 seconds).
d.
If 3M™ Cavilon™ No Sting Barrier Film is applied to area with skin folds or other skin-
to-skin contact, make sure that skin-contact areas are separated to allow the film to
thoroughly dry before returning to normal position.
•
Allow 3M™ Cavilon™ No Sting Barrier Film to thoroughly dry before covering
with dressings.
•
Reapplication of 3M™ Cavilon™ No Sting Barrier Film is necessary each time
dressings are changed; the barrier film is removed by the V.A.C.
Drape adhesive.
e.
If desired, the film can be removed by using most medical adhesive removers as
directed. Clean and dry the involved area and reapply 3M™ Cavilon™ No Sting Barrier
Film.
6. Ensure adequate hemostasis has been achieved (refer to Warnings, Bleeding section,
Hemostasis, Anticoagulants and Platelet Aggregation Inhibitors).
7. Protect sensitive structures, vessels and organs (refer to Warnings, Bleeding section, Protect
Vessels and Organs).
8. Sharp edges or bone fragments must be eliminated from wound area or covered (refer to
Warnings, Bleeding section, Sharp Edges).
Advanced Drape, 3M™
®
Fig. 1
17
Advanced
®