WARNING
A hose attached to a sink sprayer may burst if it is installed on the same water pipe as the
dishwasher. If your sink has such a sprayer, it is advisable to disconnect the hose and close
the hole.
Connecting the safety supply hose
1. Pull the safety supply tubes completely out of the compartment at the back of the dishwasher.
2. Tighten the screws of the safety supply hose on the water tap with a 3/4 inch thread.
3. Switch the water on completely before starting the dishwasher.
Detaching the safety supply hose
1. Shut off the water.
2. Unscrew the safety supply hose from the water tap.
34