Merit Fitness 725T Manual Del Propietário página 6

ASSEMBLY STEP 1
HARDWARE bAG 1 CONTENTS :
FRAME EXTENSION TUBE
BOLT (A)
6
BOLT (A)
15mm
Qty: 4
Open HARDWARE bAG 1.
A
Slide the LEfT fRAME ExTENSION TUbE
B
onto the base frame. Bolt in place using 2
bOLTS (A) on the side.
Repeat on the other side.
C
NOTE: the treadmill must be lifted up slightly
while sliding the frame extension tube into
position. This can be done with the assistance
of another person or by sliding something sturdy
under the base frame.