Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY STEP 3
HARDWARE bAG 3 CONTENTS :
BOLT (D)
20 mm
Qty: 4
ARC WASHERS (E)
LOCK WASHERS (B)
BOLTS (D)
8
LOCK WASHER (B)
FLAT WASHER (C)
20 mm
20 mm
Qty: 2
Qty: 4
CONSOLE
CABLE
COVER
FLAT WASHERS (C)
LOCK WASHERS (B)
BOLTS (D)
Open HARDWARE bAG 3.
A
Attach the CONSOLE to the upright mast
B
ARC WASHER (E)
18 mm
from the back using 2 bOLTS (G), 2 LOCK
Qty: 2
WASHERS (b), 2 ARC WASHERS (E).
NOTE: make sure console cable is not blocking
any of the bolt holes.
Attach from the side using 2 bOLTS (G),
C
2 LOCK WASHERS (b) and 2 fLAT
WASHERS (C).
After all bolts are inserted for assembly step
D
2 and assembly step 3, all bolts can be
completely tightened.
Connect the CONSOLE CAbLE and carefully
E
tuck wires in mast to avoid damage. NOTE: do
not pinch console cable. Be sure the console
cable prongs are aligned and the ends are
tightly seated into each other.
Attach CONSOLE CAbLE COvER.
F
Attach CUP HOLDER.
g
Publicidad
Tabla de contenido
