Honeywell QUIETSET HS-1650 Serie El Manual Del Propietario página 5

ASSEMBLY INSTRUCTIONS (continued)
REMOTE CONTROL BATTERY INSTALLATION/
REPLACEMENT INSTRUCTIONS
A. Remove battery door by sliding downward in direction of
arrow.
B. Insert 2 AAA batteries into the remote following the directional
guides in the recessed slots (Fig. 9). Batteries are included.
C. R eplace battery door by sliding upward opposite of arrow
direction until door snaps in place.
NOTE: DO NOT MIX OLD AND NEW BATTERIES. DO NOT MIX ALKALINE,
STANDARD (CARBON-ZINC) OR RECHARGEABLE (NICKEL-CADMIUM) BATTERIES.
SEE RECYCLERS IN YOUR AREA FOR PROPER DISPOSAL OF BATTERIES.
HS-1655, HS-1665 SERIES FAN OPERATION
FAN OPERATION FAN OPERATION
ON/OFF
To turn fan on, press the Power button ( )
located at the bottom of the control panel
(Fig. 10).
SPEED CONTROL
To adjust the speed up or down, press
the Fan Speed button ( ) repeatedly to
increase level (Fig. 10).
TIMER
Choose from 1, 2, 4, or 8 hour settings by
performing the following function (Fig. 10):
• 1 hour:
Press the Timer button ( ) once.
• 2 hours:
Press the Timer button twice.
• 4 hours:
Press the Timer button a third time.
• 8 hours:
Press the Timer button a fourth time.
Press the Timer button a fifth time to turn the
Timer feature off.
OSCILLATION
• Oscillation Knob is located on the top panel of
the Motor Assembly behind the Carry Handle.
• To START fan oscillation, push the Oscillation
Knob DOWN.
• To STOP fan oscillation, pull the Oscillation
Knob UP.(Fig. 11).
Fig. 9
Model HS-1655,
HS-1665
Speed
Timer
Power
Fig. 10
Down/
Up/
ON
OFF
Oscillation knob
Model HS-1655C,
HS-1665C
Fig. 11
5