Filter Replacement
6. Replace Front Panel by positioning the Panel slightly above
the unit and aligning the tabs of the Front Panel with the
holes in the unit (A). Gently press the Front Panel down,
sliding into the tab slots and allowing the magnets to se-
curely lock the Front Panel in place.
A
±
±
Safety Shut-Off Feature
For your protection, the unit is designed to operate only if the
Front Panel is in place. Do not attempt to override this safety
feature. If, after the Front Panel has been reinstalled, the unit
does not operate, remove and reinstall the Front Panel to as-
sure proper placement.
16 English
7. To reset the Replace Filter notification - press and hold the
REPLACE CARBON or REPLACE HEPA button, depending
on which Filter was replaced, for at least 3 seconds. The
light will turn off confirming the indicator is reset.
Press for
3 seconds.
Note: Do not operate the Air Purifier without Vornado Carbon
and Vornado HEPA Filters in place.
Storage
Follow the steps listed below when you are ready to store your
unit.
1. Unplug power cord and bundle loosely.
2. Lift unit with both hands, using hand holds. (Refer to USER
TIPS on page 13)
3. Cover, or place back in retail carton if available. This will
prevent the unit from accumulating dust overtime.
4. Store unit in a cool and dry location.
Press for
3 seconds.