4. Remove and discard used Filters. Simply take hold of the Carbon
Filter at any place along the perimeter and remove. To remove
the HEPA Filter, take hold of the tab (Figure 1) and pull to release.
Replace with genuine Vornado Filters. Place the Filters in the unit
and gently press around the perimeter of the Filter to ensure se-
cure placement (Figure 2).
Note: The HEPA Filter must be placed in the unit before the Carbon
Filter. See Product Information for a detailed illustration.
Fig. 1
Fig. 2
14 English
5. Replace the Plastic Support Filter Frame by securing the bottom
2 tabs into bottom slots (B). Slightly flex the Plastic Support Filter
Frame to secure the top 2 tabs into the top slots (A).
A
A
A
B
B
B
6. Replace Front Panel by positioning the Panel slightly above the unit
and aligning the tabs of the Front Panel with the holes in the unit
(A). Gently press the Front Panel down, sliding into the tab slots
and allowing the magnets to securely lock the Front Panel in place.
A
±
±
SAFETY SHUT-OFF FEATURE
For your protection, the unit is designed to operate only if the Front
Panel is in place. Do not attempt to override this safety feature. If,
after the Front Panel has been reinstalled, the unit does not operate,
remove and reinstall the Front Panel to assure proper placement.
7. To reset the CARBON filter notification - press and hold the
REPLACE CARBON button for 3 seconds. To reset the HEPA
filter notification, press and hold the REPLACE HEPA button for 3
seconds. The light will turn off confirming the indicator is reset.
Press for 3 seconds
Note: Do not operate the Air Purifier without Vornado Carbon and
Vornado HEPA Filters in place.
STORAGE
Follow the steps listed below when you are ready to store your unit.
1. Unplug power cord and bundle loosely.
2. Lift unit with both hands, using hand holds. (Refer to USER TIPS)
3. Cover, or place back in retail carton if available. This will prevent
the unit from accumulating dust overtime.
4. Store unit in a cool and dry location.
English 15