Cleaning And Descaling - Philips Avent SCF356 Manual Del Usuario

ENGLISH
16

Cleaning and descaling

Cleaning
1 After each use, unplug the baby bottle warmer and let it cool down
(Fig. 23).
2 Remove the water from the baby bottle warmer for hygienic reasons
(Fig. 24).
3 Wipe the outside and inside of the baby bottle warmer with a
moist cloth (Fig. 25).
Do not use abrasive, anti-bacterial cleaning agents, chemical solvents or
sharp tools to clean the baby bottle warmer.
Note: If you used the baby bottle warmer to warm containers with baby food,
make sure that no spilled baby food remains on the bottom of the baby
bottle warmer.
Descaling
It is recommended to descale the baby bottle warmer every
four weeks to ensure it continues to work efficiently.
1 Mix 50ml/1.7oz of white vinegar with 100ml/3.4oz of cold water
to descale the baby bottle warmer. First select the defrost setting,
then switch on the baby bottle warmer and let the appliance
operate for 10 minutes. Leave the solution in the baby bottle
warmer until all scale has dissolved (Fig. 26).
Note: You can also use citric acid based descalers.
Note: Do not use other types of descalers.
2 Unplug the baby bottle warmer before you empty it (Fig. 23).
3 Empty the baby bottle warmer and rinse its inside thoroughly.
If you still see traces of scale after rinsing, repeat the descaling
procedure (Fig. 24).
Disposal
Do not throw away the appliance with the normal household waste at
the end of its life, but hand it in at an official collection point for recycling.
By doing this, you help to preserve the environment.