Master Forge FL-6002H-2S Manual Del Usuario página 4

ASSEMBLY
1. Measure the proper position where the spit rod (B)
should be placed. Make sure it won't interfere with
the grill hood or any part of grill. Then decide which
holes of motor bracket (X-Y-Z) and
spit rod bracket (H) to attach to grill.
2. Use bolt (AA) to attach motor bracket (X-Y-Z) to the
outside of the grill's left side (or right, depending on
the grill). Place a washer (CC) on the end of each
bolt (AA) and secure assembly with nuts (BB).
Note: Do not overtighten. Attach spit rod bracket (G)
to the opposite side of the motor bracket (X-Y-Z)
using the same procedure.
Hardware Used
Bolt
AA
Nut
BB
Washer
CC
3. To accommodate several styles/designs of grills, the
motor bracket (X-Y-Z) is adjustable. Should the
motor bracket (X-Y-Z) as assembled not fit your grill,
please adjust the piece: Use a Phillips screwdriver
and pliers to loosen the screws on part Z of
motor bracket (X-Y-Z). Decide where you want to
mount the motor on the grill and move part Z to the
proper hole, tightening the screws securely.
Fig. 1
A
Fig. 2
x4
x4
x4
Fig. 3
Z
4
X-Y-Z
X-Y-Z
AA
Y
X
E
B
H
F
D
G
CC
BB
Y
Z
X