ASSEMBLY INSTRUCTIONS
Step 4: Attaching the side handle.
Align handle with holes as shown in figure 4. Connect the
handle to the cart using the detached bolts from step 3.
Step 5: Attaching the lid handle.
Unlock the top lid of the service cart. Align the ends of the lid
handle with the holes on the lid front. Using the two Phillips head
screws provided, mount the lid handle securely to the cart.
IMPORTANT:
Step 6: Tighten all bolts.
At this point, all bolts should be tightened. Tighten bolts opposite
each other rather than tightening all bolts on one side first so
that cart remains aligned. Avoid using excessive force when
tightening bolts. Over-tightening bolts can make drawers bind
and hinder their operation.
Step 7: Finishing.
Insert drawer liners in their corresponding location.
Assembly is now complete.
815-6265 Parts Breakdown & Operating Manual
4
5
3
rev. 11/11/07