Adding Equipment To The Workstation; Place Free-Standing Equipment Onto The Workstation - StarTech.com ARMSTSLG Guia Del Usuario

1. To move the workstation up or down, squeeze the paddle located on the right side
of the Workstation. (figure 1)
2. When the workstation is at the desired height, release the paddle to lock the
Workstation into position.

Adding equipment to the Workstation

You can place equipment onto the Workstation or you can use the provided hardware
and grommet hole to mount your equipment to the Workstation.
Warning! If you attach a monitor arm to the Workstation, make sure that you don't
position the monitors beyond the edge of the desk surface. If you extend the monitors
past the desk surface, you could create a tipping hazard. Make sure that you lower
the Workstation to its lowest position before you add equipment to it, distribute the
weight across the Workstation evenly, and don't extend the monitors beyond the edge
of the adjustable desk surface.

Place free-standing equipment onto the Workstation

1. Move the Workstation to the lowest position.
2. Place your equipment (for example, monitors, keyboard, mouse, and so on) onto the
workstation. (figure 2)
Warning! Do not exceed the weight capacity of the Workstation.
figure 2
Instruction manual
7
0 to 28 lb.
0 to 5 lb.