Página 1
Sit-to-Stand Workstation ARMSTS *actual product may vary from photos FR: Guide de l'utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l'uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.startech.com/ARMSTS.
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual...
Warning Statements • Assemble this product according to the instructions. • Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product. • Do not exceed the weight capacity of this product. Overloading this product might result in injury or property damage.
Página 4
orsaka skada på person eller egendom. • Arbetsstationens viktkapacitet: 11 kg (24,3 lb.) • Tangentbordslådans viktkapacitet: 2 kg (4,4 lb.) • Låt inte barn klättra på produkten eller använda produkten utan uppsikt. • Produkten är endast avsedd för användning inomhus och ska inte användas utomhus.
Página 5
worden gebruikt. • Draai de schroeven niet te strak vast wanneer u dit product in elkaar zet. Als u weerstand voelt tijdens het vastdraaien van de schroeven, stop dan. • Gebruik dit product nooit als er onderdelen ontbreken of beschadigd zijn. •...
In caso contrario, potrebbero verificarsi danni alla proprietà e/o lesioni personali. • Assicurarsi che tutti i cavi dell’attrezzatura siano di lunghezza adeguata per la posizione più alta della stazione di lavoro/display. In caso contrario, si potrebbero verificare danni alla proprietà e/o lesioni personali. •...
• Lors de la descente ou de la montée du poste de travail, assurez-vous que l’équipement monté est correctement fixé ou soutenu et que la vitesse est suffisamment lente pour éviter toute instabilité de l’équipement. Le non- respect de cette consigne peut entraîner des dommages matériels et/ou corporels.
• Ao baixar ou subir o posto de trabalho, assegurar que o equipamento montado está devidamente fixado ou suportado e que a velocidade é suficientemente lenta para evitar qualquer instabilidade do equipamento. Não o fazer pode resultar em danos materiais e/ou ferimentos pessoais. •...
Página 10
• Asegúrese de que todos los cables de los equipos tengan la longitud adecuada para la posición más alta de la estación de trabajo o pantalla. Si no lo hace, puede provocar daños materiales y/o lesiones personales. • ¡Peligro de vuelco! Este producto es independiente y, por lo tanto, propenso a volcarse si se manipula incorrectamente o se sobrecarga.
Página 11
• Vergewissern Sie sich, dass alle Gerätekabel eine ausreichende Länge für die höchste Position der Workstation/des Displays haben. Andernfalls kann es zu Sach- und/oder Personenschäden kommen. • Kippgefahr! Dieses Produkt ist freistehend und neigt daher bei falscher Handhabung oder Überlastung zum Umkippen. Seien Sie vorsichtig, wenn Sie das Produkt bewegen, laden, entladen und einstellen.
Attach the keyboard tray to the mounting pillar ................9 Affix the pressure pads to the base ....................10 Attach the base ............................11 Convert the ARMSTS to a sitting or standing position ..............13 Attach a monitor ..................14 Weight restrictions .................15 Technical support ...................16...
Product dimensions 856 mm (33.7 in.) 642 mm (25.3 in.) 559.9 mm (22.0 in.) 345.9 mm (13.6 in.) 642 mm (25.3 in.) 856 mm (33.7 in.) 800 mm (31.5 in.) Instruction manual...
You can use the ARMSTS to turn your workstation into a dual-functioning area that enables you to either sit or stand while you work. The height-adjustable feature of the ARMSTS makes it easy to quickly change from a standing to a sitting position, making it an integral element in your ergonomic work setup.
Página 16
M6*8 screws M6*12 screws M6*25 screws M10*50 bolt Qty: Two Qty: Sixteen Qty: Four Qty: One Instruction manual #3/8 - 16 x 50 mm bolt Qty: One Qty: One Instruction manual...
Assemble the workstation Stored Energy Hazard! This product contains a spring mechanism which can cause the assembly and/or mounted equipment to move forcibly, and quickly, when released via the actuating lever or handle. Read and follow the operating instructions and heed any precautions provided.
Warning! When lowering or raising the workstation, ensure the mounted equipment is properly secured or supported and the speed is slow enough to prevent any equipment instability. Failure to do so may result in property damage and/or personal injury. Attach the pneumatic arm to the workstation 1.
Attach the pneumatic arm to the mounting pillar 1. Line up the two holes on each of the brackets of the pneumatic arm (1) with the four holes on the mounting pillar (7). 2. Use the M4*55 Allen wrench (12) to insert four M6*12 screws (14) into the pneumatic arm and then the mounting pillar.
Attach the back plate to the keyboard tray 1. Line up the top four holes on the back plate (3) with the four holes on the keyboard tray (2) so that the bottom two holes on the back plate are hanging over the edge of the keyboard tray.
Attach the keyboard tray to the mounting pillar 1. Affix the small pressure pads (8) onto the reverse side of the keyboard tray (2) in the areas indicated in the diagram. 2. Use the M4*55 Allen wrench (12) to insert two M6*8 screws (13) into the top two holes on the keyboard tray and then the mounting pillar (7).
Affix the pressure pads to the base 1. Affix the circular pressure pads (9) onto the underside of the base (6) in the areas indicated in the diagram. Instruction manual...
Attach the base Warnings! The Pneumatic Arm contains a spring mechanism which will result in the arm moving forcibly and quickly when the lever is actuated (i.e. squeezed). To avoid injury or property damage, keep hands away from any pinch points created by the moving components and your body and/or property away from the arm’s swing path (image below).
Página 24
1. Press the pneumatic arm lever to extend the pneumatic arm. Caution: To prevent the pneumatic arm from rising too quickly, hold down the arm of the base as you squeeze the lever. 2. Turn over the assembled pneumatic arm and line up the four holes on the pneumatic arm (1) with the four holes on the base (6).
Convert the ARMSTS to a sitting or standing position 1. To convert the ARMSTS to a standing or sitting position, press the lever on the pneumatic arm. 2. To adjust the tension, move the arm to 45 degrees and do one of the following: •...
Only one clamp is required. Caution! If you use a clamp to secure the ARMSTS to the desk, make sure that the weight of the monitor arm is distributed towards the back of the ARMSTS when you remove the clamp.
Weight restrictions Warning! The weight limit for the ARMSTS is a total of 13 kilograms (28.7 pounds) and the total weight of the monitors and keyboard shouldn’t exceed that weight. The weight limit of the workstation surface is 11 kilograms (24.3 pounds). The weight limit of the keyboard tray is 2 kilograms (4.4 pounds).
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Página 29
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.