StarTech.com offers several optional accessories that you can use with the ARMSTS,
including the ARMDUAL, ARMSLIM, or ARMPIVOT. To attach the optional accessories,
complete the following steps:
1. If the accessory is configured for a desk mount, it needs to be reconfigured
for a grommet mount. For detailed instructions on how to do this, see the
documentation that came with your product.
2. Position the accessory over the grommet on the ARMSTS workstation (5).
3. Depending on the size of the monitor stand pole, thread the M10*50 bolt (16) or the
#3/8 - 16 x 50 mm bolt (17) through the clamp plate (10).
4. Holding the accessory upright, thread the bolt through the grommet and into the
accessory.
5. Turn the bolt clockwise to tighten it.
Weight restrictions
Warning! The weight limit for the ARMSTS is a total of 13 kilograms (28.7 pounds)
and the total weight of the monitors and keyboard shouldn't exceed that weight. The
weight limit of the workstation surface is 11 kilograms (24.3 pounds). The weight limit
of the keyboard tray is 2 kilograms (4.4 pounds).
Instruction manual
5
15
accessory
10
or
16
17