BLUE SKY PHG8732BZ Manual Del Usuario página 18

STEP 11
FF
Slide one 8 mm washer [FF] over each
EE
of the exposed ends of the reflector
spacers [EE], which are sticking out of
C
the head assembly [C].
Place the reflector assembly on the
three spacers.
Slide one 8 mm washer over each
of the exposed ends of the reflector
spacers, which are sticking through the
top of the reflector assembly.
JJ
Then securely tighten a wing nut [JJ]
FF
to each of the threaded ends of the
reflector spacers.
Do not overtighten.
EE FF
JJ
18 | www.bluesk youtdoorliving.com