Battery And Fuse Replacement; Service And Parts - Cargo 211102 Manual Del Usuario

GB

Battery and Fuse Replacement

Warning
TO AVOID ELECTRIC SHOCK, REMOVE TEST LEADS
BEFORE OPENING CASE AND BATTERY DOOR.
Battery Voltage is enough if the indication is clear and
symbol has dissapeared from the LCD display. If
the symbol indicate or no indication on the display
and other incorrect case (example: the weak backlight
brightness etc.), you should replace with new battery
specified as below.
1.5 Volt battery replacement
a. Ensure the instrument is not connected to any external
circuit. Set the selector switch to "OFF" position and
remove the test leads from the terminals.
b. Remove the screw on the battery door and lift the
battery door (the battery door located at top of bottom
case). Remove the old battery and replace it with a
new battery of the same type.
c. Do not dispose the batteries with household waste.
Refer to your local area for the proper disposal of used
batteries.
Fuse replacement
a. Ensure the instrument is not connected to any external
circuit. Set the selector switch to "OFF" position and
remove the test leads from the terminals.
b. Remove the screw on the battery door and lift the
battery door (the battery door located at top of bottom
case). Then loose 3 pieces screw on the bach case
and lift the bottom case. Replace only with the same
type and rating of fuse: 0.5A/250V (Cargo 190285)
10A/250V Cargo 192861.
Automatic Selection
Function
AC V
(50 to 400 Hz)
DC V
Ω
Input maximum: 600 V. rms.
Range
4.000 V
40.00 V
400.0 V
500 V
± 4.000 V
± 40.00 V
± 400.0 V
± 500 V
400.0 Ω
4.000 kΩ
40.00 kΩ
400.0 kΩ
4.000 MΩ
40.00 MΩ

Service and Parts

This Digital Multimeter should be serviced only by a
qualified technician.
Specifications
Maximum voltage:
Between any terminal and Earth Ground 600 V. rms.
Display:
3¾-digits, 4000 counts, updates 3/sec.
Overload indication:
"OL" show on right up of the LCD.
Use environment:
Temperature 0°C to 40°C, (32° to 104°F),
humidity <80% RH.
Storage environment:
Temperature -20°C to 60°C, (-4° to 140°F),
humidity <90% RH.
Altitude:
Operating under 2000m. Storage under 10.000m.
Battery type:
2 pcs. Alkaline 1.5 V AA. Cargo 200739.
Dimensions: 83 W x 165 H x 37 D mm.
Weight: Approx. 250 g. (incl. batteries).
Safety standards:
ETL/ EMC/LVD. The meter is up to the standards of
IEC1010 Pollution Degree, Overvoltage Category III.
Rated 600Vac CATIII, Rated 1000Vdc CATII.
Accuracy is ± (% of reading + number in last digit) at 23
± 5°C, <75% RH.
Temperature ciefficient: 0.1% / °C.
Resolution
1 mV
10 mV
0.1 V.
1 V
1 mV
10 mV.
0.1 V
1 V
0.1 Ω
1 Ω
10 Ω
0.1 kΩ
1 kΩ
10 kΩ
6
211102
Accuracy
± (0.8% +5)
± (0.8% +5)
± (0.8% +5)
± (1.2% +5)
± (0.5% +5)
± (0.5% +5)
± (0.5% +5)
± (0.8% +5)
± (1% +5)
± (1% +5)
± (1% +5)
± (1% +5)
± (1% +5)
± (2% +5)
Vedpak 137_Version 2_110609