ASROCK 939Dual-VSTA Manual Del Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CAUTION!
1.
For power-saving's sake, it is strongly recommended to enable AMD's Cool 'n'
TM
Quiet
technology under Windows system. See APPENDIX on page 45 of
"User Manual" in the support CD to enable AMD's Cool 'n' Quiet
Since not all K8 939-pin CPU can support AMD's Cool 'n' Quiet
please check AMD's website for details.
2.
This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 23 for details.
3.
This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 11 for proper installation.
4.
Although this motherboard offers stepless control, it is not recommended to
perform over-clocking. Frequencies other than the recommended CPU bus
frequencies may cause the instability of the system or damage the CPU.
5.
While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the motherboard
functions properly and unplug the power cord, then plug it back again. To
improve heat dissipation, remember to spray thermal grease between the
CPU and the heatsink when you install the PC system.
6.
For the information of the compatible PCI Express VGA cards, please
refer to the "Supported ATi X300 and X300SE Series PCI Express VGA
Card List for PCI Express Slot (PCI Express x16)" on page 9. For the
proper installation of PCI Express VGA card, please refer to the installation
guide on page 13.
7.
Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
8.
For microphone input, this motherboard supports both stereo and mono modes.
For audio output, this motherboard supports 2-channel, 4-channel, 6-channel,
and 8-channel modes. Please check the table on page 3 for proper connection.
9.
Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 19 to adjust your SATAII hard disk drive to
SATAII mode. You can also connect SATA hard disk to SATAII connector
directly.
10. Power Management for USB 2.0 works fine under Microsoft
TM
Vista
/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.
11. Microsoft
®
Windows
®
Vista
our website in the future. Please visit our website for Microsoft
Windows
®
Vista
TM
driver and related information.
ASRock website
http://www.asrock.com
ASRock 939Dual-VSTA Motherboard
TM
driver is not ready yet. We will update it to
TM
technology.
TM
technology,
®
®
Windows
®
7 7 7 7 7

Publicidad

Tabla de contenido
loading

Tabla de contenido