LG WT21WT6HKA Manual Del Propietário página 63

global_main.book.book Page 23 Friday, February 26, 2021 4:06 PM
Cold Wash (Lavado Frío)
Use this option to save energy by using cooler
water while increasing the wash and rinse times to
maintain wash performance.
• Wash time will increase up to several minutes
with this option.
• Selecting this option increases the water
supplied during rinsing. The water supplied
during washing is not increased.
• For best wash results, only wash small loads (less
than 3.7 kg) with this option.
Add Garments (Añadir Ropa)
If you've forgotten to add an item or need to
remove foreign objects like coins or keys after the
cycle has started, the best time to do so is while
the Add Garment (Añadir Ropa) indicator is on.
• Once the indicator turns off, adding garments
may affect the cycle time or wash performance.
1
Press the Start/Pause button. The cycle
pauses and the lid (door) unlocks.
2
Open the lid, add garments or remove foreign
pobjects, and close the lid.
3
Press the Start/Pause button to resume the
cycle. The cycle continues automatically.
NOTE
• This washer is equipped with a special drain
feature that is designed to make your washer as
safe as possible. If the washer is paused or shut
off while there is still water in the tub, the water
will drain automatically after several minutes of
inactivity. This helps keep children safe by
reducing the possibility of water remaining in the
tub.
Any water remaining in the tub will automatically
drain 4 minutes after the washer has shut off. If
the washer is paused and the Start/Pause
button is not pressed within 60 minutes, the
washer will shut off and all cycle settings will be
lost. Any water remaining in the tub will be
drained.
• The washer can be turned on or restarted any
time before the drain begins. However, once the
washer begins to drain, all controls and functions
will be disabled until the water has been
completely drained and the washer shuts off.
Rinse+Spin (Enjuague+Centrifugado)
Select this option to rinse and spin a load
separately from a regular cycle. This can be helpful
in preventing fresh stains from setting in fabrics.
1
Press the Power button to turn on the washer.
• Do not select a cycle.
2
Press and hold the Delay (Lavado Demorado)
button for 3 seconds.
• You can change the spin speed by
pressing the Spin (Centrifugado) button.
3
Press the Start/Pause button to begin.
Setting
Control Lock
Use Control Lock function to disable the controls.
This function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the POWER button.
• When the controls are locked,
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Extra Rinse (Enjuague
Extra) button simultaneously for 3 seconds
to activate this function.
OPERATION
23
and the
CL