Descargar Imprimir esta página

Grinding; Maintenance; Daily; Periodically - Rancilio ROCKY Uso Y Manutención

Ocultar thumbs Ver también para ROCKY:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
7. GRINDING (Fig.5)
The coffee grinder is tested by the manufacturer with
an approximate grinding adjustment. It is recom-
mended to re-adjust the grinding accoding to your
requirements and the kind of coffee to be used.
● With the motor off and the bean container empty,
press adjustment button (4) and turn the contai-
ner (1) in a clockwise direction until the grinders
touch;
Never press grinding adjustment stop button
(4) when the machine is operating.
● Now turn the container 6/7 notches in an anti-
clockwise direction and release button (4), ensu-
ring that it is perfectly blocked;
● Start up the motor using switch (2) and only for
SD model also press button (3) to make sure that
the grinders do not touch each other;
● Should the grinder scrape against each other,
immediately turn the machine off and turn the con-
tainer 2/3 notches in an anti-clockwise direction.
● Switch off the machine, open tank (1), pour a small
quantity of coffee beans into it and grind using
switch (2); then, for SD model, button (3).
● Prepare a coffe, checking the delivery time, which
should be between 25 and 30 seconds for the best

grinding;

● Check coffee quality and taste considering that
coarse grinding produces light coffee without
cream, whereas too fine grinding produces strong,
dark cofee without cream;
● If the coffee does not meet your requirements,
adjust the grinding by turning the container in a
clockwise direction for fine grindings and in an anti-
clockwise direction for coarse grindings (Fig.5);
● Repeat this operation until you get the quality of
coffee you wish.
The machine does not need new adjustments when
using the same kind of coffee; if you change th kind
of coffee, re-adjustments must be made to the grin-
ding.
Mod. ROCKY (Fig.6)
● After setting the desired grinding level, place the
filter holder into its seat and act on lever (7) to
dispense the ground coffee directly into the coffee
filter.
Press once for one-cup filter and twice for two-cup
filter.
It is recommended to grind the quantity of coffee that
is immedialely needed. When ground coffee is left for
too long, it looses its freshness and fragrance.
Never grind already ground coffee.
Mod. ROCKY SD (Fig.7)
● After setting the desired grinding level, place the
filter holder into its seat and act on lever (3) to
dispense the ground coffee directly into the coffee
filter.
Keep the button pressed until the desired dose is
obtained.

8. MAINTENANCE

The maintenance operations must be carried
out with the machine off and cold and with
the power plug disconnected.
Do not use any metallic or abrasive materials for
cleaning such as scourers, metal brushes, needles
and detergents but use a damp cloth or sponge.

8.1. Daily

● Clean the outside structure and the ground coffee
container.
● Clean the dosing area under the coffee contai-
ner.

8.2. Periodically

● Empty the coffee bean container, clean it from any
oily waste left by the coffee.
In the event of damage to the power supply
cable, contact an authorized assistance
centre for replacement as a special tool is
required.
The scrap materials used for processing or
maintenance should be placed in containers
and sent to special collection centres, unless
they are biodegradable or polluting.
31

Publicidad

loading

Este manual también es adecuado para:

Rocky-sd