Chaparral Monterey Instrucciones De Montaje página 12

BZ
x 8
HZ
x 2
FIG. 17
17. Attach Doors (Q) to unit's side panels using Screw (BZ). To properly align the door, the upper
hole in the top hinge should go over the uppermost pre-punched hole in the side panel.
Likewise, the lower hole in the bottom hinge should go over the lowest pre-punched hole in
the side panel. See Figure 17.
Apply Pad (HZ) to top edge corner of each door where they come in contact with the upper
sleeper.
DZ
CZ
x 2
18. Attach Knob (CZ) to Doors (Q) using Machine Screw (DZ). See Figure 18.
BZ
x 8
FZ
x 8
FIG. 19
19. Stand the unit upright. Determine where you want to locate the Adjustable Shelves (R). Tap
the Shelf Supports (FZ) into the holes with the flat side down. See Figure 19B. Insert the
shelf as shown. Secure the shelf to the unit using Screw (BZ) through the holes in the bottom
of the Shelf Bracket into the Shelf.
20. When you have determined the location for your unit,
install the Furniture Tipping Restraint (GZ). Carefully
follow the instructions contained on the package.
Page 12 – 549W
BZ
BZ
CZ
x 2
FIG. 18
HZ
DZ
BZ
FZ