Special Instructions; Tools Required - Chaparral Monterey Instrucciones De Montaje

SPECIAL INSTRUCTIONS

If the top or a panel should become cupped, do not be alarmed. The panel was flat
when it was manufactured. It is a natural characteristic of wood in an unfinished
state to cup from uneven moisture conditions. The Figure at the right shows an
exaggerated view of what could happen. This only means that the convex
side has absorbed moisture, or the concave side has dried out.
Usually a cupped panel will equalize and straighten out if both sides are
exposed to similar conditions for a day or so.
Phillips Head Screwdriver, Mallet or Padded Hammer, Wood Glue, Tape Measure
We recommend finishing the unit before final assembly. Before finishing, read the
To test for desired color apply stain to the back of the Base (G). See Figure 7.
I
A
J
Q
F
FIG. 1
Page 4 – 549W
549W Monterey Armoire
ASSEMBLY INSTRUCTIONS

TOOLS REQUIRED:

enclosed Finishing Hints sheet.
E
B
D
R
K
C
B
H
L
L
G
IMPORTANT:
Q
M
L
O
N
1. Lay out the wood parts in their approximate location to
aid in the identification and assembly.
ID Description
A Left Upper Side Assembly . . . . . 1
B Sleeper . . . . . . . . . . . . . . . . . . . . 3
C Lower Top . . . . . . . . . . . . . . . . . . 1
D Right Upper Side Assembly . . . 1
E Upper Top . . . . . . . . . . . . . . . . . . 1
F Left Lower Side Assembly . . . . 1
G Base . . . . . . . . . . . . . . . . . . . . . . 1
H Right Lower Side Assembly . . . 1
I Top Back . . . . . . . . . . . . . . . . . . . 1
J Middle Back . . . . . . . . . . . . . . . . 1
K Lower Back . . . . . . . . . . . . . . . . . 1
L Drawer Front . . . . . . . . . . . . . . . 2
M Left Drawer Side . . . . . . . . . . . . . 2
N Right Drawer Side . . . . . . . . . . . 2
O Drawer Bottom . . . . . . . . . . . . . . 2
P Drawer End . . . . . . . . . . . . . . . . . 2
Q Door . . . . . . . . . . . . . . . . . . . . 2
R Adjustable Shelf . . . . . . . . . . 2
P
Qty