One Touch Select Manual Del Propietário página 43

3. Get ready to transfer readings
Make sure that the meter is turned off. Connect the OneTouch
Cable to the COM or USB port on your computer. Then connect the other end
of the cable to the meter data port.
Interface
cable
4. Transfer data
Follow the instructions provided with OneTouch
from the meter.
Once the command to start the download is sent from the computer to
the meter, the meter display will show "PC" indicating that the meter is in
communication mode. You will not be able to perform a test when the
meter is in communication mode.
®
Interface
®
DMS to download results
37