Storage.aNd.tRansport - Lumex HybridLX LX1000 Manual Usuario

storAGe And trAnsPort
The HybridLX is designed for easy
™
folding and storage.
to fold for transport
1. Fold the footplates up.
2. Pull the small handle on the middle of
the seat up to release the seat from the
seat support bars.
3. Push the handles together; the
HybridLX will fold easily and be
™
ready for transport.
A Lumex® Carry Bag (Item LX1000-CB)
can be purchased as an accessory for
convenient transportation.
to store
1. Adjust the handle height to the lowest position.
2. Pull the small handle on the middle of the seat up to release the seat from the seat support bars.
3. Remove the footrests (if used) from the frame: Pull on the swingaway release levers to release
the footrests; footrests will swing outward. Lift footrests straight up off rollator hinge pins.
4. Remove the front wheels: Press the red buttons to release them from the frame.
5. Lay the HybridLX
6. Remove the rear wheel locks: Turn the rear lock knobs counterclockwise and remove the
screws. Fold rear wheels.
7. It is not required that you remove the storage bag from the HybridLX
8. Place HybridLX
™
9. Place front wheels and footrests in the Carry Bag.
10. Close the Carry Bag zipper.
LX1000-INS-LAB-RevB12
on the floor to fold the rear wheels.
™
in the Carry Bag, if available.
handle
height adjustment
locking button
height adjustment
lowest position
rear wheel
Prepare for Transport / Storage
seat handle
footrest
footplate
front wheel
.
™
10