Transport.cHair.mOde; Cleaning.aNd.mAintenance - Lumex HybridLX LX1000 Manual Usuario

trAnsPort cHAIr mode
The photo at right shows the HybridLX
Transport Chair mode.
to use in transport chair mode
You must have someone to accompany you for
use as transport chair.
WArnInG: to avoid possible tilt hazard,
when in transport chair mode, do not leave
user unattended. Attendant must always be
behind and in control of HybridLX
transport chair mode.
transport chair setup
1. Position the backrest closest to the handles
by pushing the backrest toward the handles as
shown at right.
2. Use the handbrakes to immobilize the transport chair.
3. Attach the footrests and flip the footplates up to allow user to sit.
4. Ensure the user is seated safely and comfortably.
5. Fold footplates down and ensure footrest lengths are the same.
6. Unlock the handbrakes and move about freely and carefully.
cLeAnInG And mAIntenAnce
Use a clean, soft cloth and warm water to clean the HybridLX
wheels. Rinse and air dry.
s notIce: do not use solvents and other cleaning solutions to clean the frame or the
fabric of this product.
Check fit and tightness of all nuts, bolts and knobs weekly.
WArnInG: Inspect the HybridLX
is not in proper working order or appears worn, contact your Graham-field
distributor for repair and/or appropriate replacement parts.
WArnInG: the use of non-Lumex
create a hazardous condition resulting in serious personal injury.
LX1000-INS-LAB-RevB12
in
™
when in
™
weekly for proper function and wear. If any component
™
replacement parts will void the warranty, and could
®
backrest
handle
handbrake
seat
Transport Chair Mode
frame, handles, footrests and
™
armrest
footrest
authorized
®
9