To View Max / Min; Calibration; Back Light - Bresser Tuya Smart Manual De Instrucciones

TREND INDICATOR
The trend indicator shows the temperature or humidity trends of
changes based on later 15 minutes .
MAX / MIN DATA RECORD
The console can record MAX / MIN
readings both daily and since last
reset .

TO VIEW MAX / MIN

1 . In normal mode, press [ MAX / MIN ] key on the front side, to check the daily MAX records of
current channel and indoor .
2 . Press [ MAX / MIN ] key again to check the daily MIN records of current channel and indoor .
3 . Press [ MAX / MIN ] key again to check the accumulative MAX records .
4 . Press [ MAX / MIN ] key again to check the accumulative MIN records .
5 . Press [ MAX / MIN ] key again and back to normal mode .
6 . User can also check records of different sensor by pressing [ CHANNEL ] key .
TO RESET THE MAX/MIN RECORDS
Press and hold [ MAX / MIN ] key for 2 seconds to reset the current on display MAX or MIN
records .
NOTE:
The LCD will also display the "

CALIBRATION

To calibrate the temperature and humidity:
1 . In normal mode, press and hold [
below .
2 . Press [ + ] or [ - ] key to select IN or any Channels .
3 . Press [ MODE / ALARM ] key to select between: Temperature
4 . While temperature or humidity is blinking, press [ + ] or [ - ] key to adjust the offset value.
5 . When finished, press [ MODE / ALARM ] to proceed with next calibration by repeating
process 2 - 4 above .
6 . Press [ / CAL ] key to return to normal mode .

BACK LIGHT

The main unit back light can be adjusted, using the [ HI / LO ] sliding switch to select the
appropriate brightness:
- Slide to the [ HI ] position for the brighter back light .
- Slide to the [ LO ] position for the dimmer back light .
Daily MAX Daily MIN
reading reading
" / " "icon, when showing the record(s) .
/ CAL ] key for 2 seconds to enter the calibration mode as
34
Rising Steady
MAX reading MIN reading
since last since last
reset reset
Humidity .
Falling