Changing The Battery - LaserLiner VideoInspector 3D Manual De Instrucciones

Changing the battery

Remove magnetic holder, open battery compartment and insert battery as indicated by the installation
symbols. Ensure correct polarity.
Connect power supply / battery charger
To charge the device, plug the supplied power supply/charger unit into the micro USB interface/charging
socket „6" and connect it to a corresponding power source.
Camera unit replacement
The camera unit is easy to remove
and replace. Simply undo the screw
and pull out the camera unit by
the joystick.
Danger - powerful magnetic fields
Powerful magnetic fields can adversely affect persons with active medical implants (e.g. pacemaker)
as well as electromechanical devices (e.g. magnetic cards, mechanical clocks, precision mechanics,
hard disks).
With regard to the effect of powerful magnetic fields on persons, the applicable national stipulations and
regulations must be complied with such as BGV B11 §14 „electromagnetic fields" (occupational health
and safety - electromagnetic fields) in the Federal Republic of Germany.
To avoid interference/disruption, always keep the implant or device a safe distance of at least 30 cm
away from the magnet.
22
EN
2
1
1
2