Insignia NS-HWG1641 Guia Del Usuario página 15

40" Espresso Wood Finish Open Framed TV Stand
Step 10 Attaching the doors
:
1 Carefully stand your unit upright.
2 Before attaching the doors to your unit, make sure that the mounting screw is against the stops, as shown
below. If it isn't, loosen the mounting screw to slide it against the stops, then tighten the mounting screw.
3 Attach a door (G) to the left end (B), as shown, with the screws in the hinges. Start all of the screws a few turns,
then tighten them.
4 Repeat step 2 to attach the other door.
5 Attach the knobs (25K) to the front of the doors with a 7/8" silver machine screw (42S).
6 Peel two felt disks from the felt disk card (1M) and stick them to the doors where they contact the upright (C).
See the next step for door adjustments.
1M
25K
1M
You'll need:
Phillips screwdriver
42S
42S (2)
25K (2)
www.insigniaproducts.com
Stop
Mounting
screw
Hinge
1M (1)
15