Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Step 3
Fastening the ends and upright to the top
:
1 Stand the top (D) with its finished edge facing up, as shown, then align the ends (A and B) and upright (C) and
push the holes with the hidden cams onto the cam screws on the top. Make sure that the finished edges of all
parts are facing up.
2 Tighten each hidden cam with a Phillips screwdriver as tight as possible (about 180°).
Caution: Do not stand the unit upright without the back fastened. The unit may collapse.
8
40" Espresso Wood Finish Open Framed TV Stand
You'll need:
Phillips screwdriver
www.insigniaproducts.com
Finished edge
Publicidad
Tabla de contenido
