Before Using For The First Time; Using The Oven - Zanussi ZOK35901XK Manual Del Usario

Before using for the first time

Carefully read this Instruction Manual to
achieve the best results from your oven.
Due to the manufacturing process there may
be residues of grease and other substances.
To eliminate these, proceed as follows:
• Remove all the packaging material,
including the protective plastic, if included.
• Select the or
one hour. To do so, consult the feature list
provided with this manual.

Using the oven

In the event of a power failure, all the
settings (time of day, programme setting
or programme in operation) will be
cancelled. When the power is restored,
the numbers in the display will flash, and
the clock/timer has to be reset.
Setting the time of day
When the power supply is switched on, or
after a power failure, the "Time of day" pilot
lamp will flash on the display.
To set the correct time of day:
1. Press button "
2. After the setting is carried out, wait for 5
seconds: the "Time of day" pilot lamp
will go out and the display will show the
set time. The appliance is ready for use.
To reset the correct time of day:
1. Press button repeatedly to select the
"Time of day" function. The relevant pilot
lamp will start flashing. Then proceed as
described above.
The time of day can only be reset if no
automatic function (cook duration
end of cooking
6
function at 200ºC for
" or " ".
) has been set.
• To cool the oven open the door to allow
ventilation and odours to escape from
inside.
• After cooling, clean the oven and the
accessories.
During the first use, fumes and odours may
occur and the kitchen should therefore be
well ventilated.
Manual operation
After setting the correct time, the oven is
ready for use. Select a temperature and a
cooking function.
1. Select temperature 2. Select a cooking
To switch off the oven, set the controls to the
position 0.
Heating-up indicator
The heating-up indicator on the control
panel will light up while the appliance is
heating up and will go out as soon as the set
temperature has been reached. It also comes
on during operation when the oven is heated
to maintain the temperature you want.
or
function
www.zanussi.com