Keep-Warm Function; Overheating Protection - Silvercrest SWKD 2400 B2 Instrucciones De Uso

Keep-warm function

The keep-warm function allows you to keep heated water at a specifi c tempera-
ture for an extended period of time. As soon as the water temperature in the jug
sinks below the set temperature, the appliance will automatically heat it to that
temperature again.
You can set the keep-warm function for temperatures between 40°C and 90°C
in 5°C stages:
♦ When the appliance is activated, press the
keys
during the heating process, the
♦ Once the set target temperature has been reached, you will hear a beep
and the display will stop fl ashing. The temperature is thus maintained at the
desired level.
NOTE
► If the water is already as hot or hotter than the selected temperature on the
display
maintained.
► The keep-warm function remains active for 2 hours. The appliance will then
switch off automatically.
► If you remove the jug
activated, the keep-warm function will be cancelled. The display indicator
and all buttons go out.
♦ To switch the keep-warm function off manually, press the
button

Overheating protection

If the appliance overheats, the overheat protection automatically switches off the
heating element inside the appliance. The overheating protection is activated if
the appliance is switched on while the jug
If the heating element has been switched off by the overheating protection, allow
the appliance to cool down before using it.
SWKD 2400 B2
to set the required temperature. The display indicator
, the signal will sound immediately. The set temperature will be
from the base
.
button
button and button
while the keep-warm function is
contains no or not enough water.
GB│IE
and use the arrow
fl ashes
light up.
button or the
27 ■
│