Laser Marking - Powerfix Profi 298736 Instrucciones De Utilización Y De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 122

Laser marking

or animals. NEVER look directly into
the laser. The laser can cause serious
eye damage.
Use the laser marking function to align
pictures, cupboards, and other things,
vertically or horizontally. Depending
up on room environment light, up to
10 m maximum laser line can be pro-
jected.
Slide the function switch
position "LASER". A laser line is
projected.
Horizontal laser line
1. Hold the product horizontally to a soft
surfaced wall (example: Wooden
wall). To do this, direct the product
so that the air bubble in the vial
lies between the two marked lines.
2. Slide both the stud buttons
firmly downwards. The nails lightly
penetrate on the soft surfaced wall to
prevent the multi-detector from falling
(see Fig. J)
Attention: Exercise care with the
studs. These are sharp and can cause
injury (see Fig. E). Do not use the stud
button on stone or metal wall, but
only on walls with a soft surface
(example: wooden wall).
Note: In case, a slight angle adjust-
ment is necessary on the projected
horizontal laser line, the folding slot
The product contains a
Class 2 laser. NEVER direct
the laser beam at people
to the
9
8
,
5
11
17
GB/IE
47

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido