Setup Instructions; Activate Battery; Operating Instructions; Measuring Real-Time Air Speeds - Omega HHF-308 Guia Del Usuario

Fig. 2. All possible display
indications
A. Air speed unit: m/min
B. Air speed unit: m/s
C. Air speed unit: km/h
D. Air speed unit: ft/min (fpm)
E. Air speed unit: m/h (mph)
F. Air speed unit: knots
G. Maximum air speed indication
H. Minimum air speed indication
I. Average air speed indication
J. Low battery icon
K. Reading hold indication
M. Air speed reading
O. °F indicator

SETUP INSTRUCTIONS

ACTIVATE BATTERY

1. Turn the anemometer over and use a coin to open the battery
compartment at the bottom of the unit.
2. Remove the activation tab under the pre-installed "CR2032" battery.
3. Replace the battery compartment cover and hand-tighten it with the coin.
Complete Setup by carefully removing the plastic film protecting the LCD.

OPERATING INSTRUCTIONS

MEASURING REAL-TIME AIR SPEEDS

To power on the HHF-308, briefly press the
illuminate with the backlight on and the unit will automatically enter real-time
measurement mode. The backlight will turn off after 15 seconds if no front-
panel button is pushed. Pushing any button begins another 15 seconds of
backlight.
4
L. Wind chill indication
N. Temperature reading
P. °C indicator
/WCI button. The LCD will