Features; Hardware Requirements; Console; Cables - Tripp-Lite B004-008 El Manual Del Propietario

Features

• Control Up to 8 PCs from a Single Console (Keyboard, Monitor and Mouse)
• No Software Required - PC Selection done via Front Panel Switches or Hot Keys
• Quick View Scan Mode for Monitoring Selected PCs
• PS/2 and Serial Mouse Emulation Provided for System Bootup
• Console's PS/2 Mouse Controls All Connected PCs
• Microsoft Intellimouse Pro, Logitech FirstMouse, FirstMouse+ Support*
• SVGA, VGA and Multisync Monitor Support
• LED Display for Easy Status Monitoring
• Rack Mountable in 19" System Rack
• Hot Pluggable - Add or Remove PCs for Maintenance Without Powering Down the Switch
• Superior Video Quality: 1920x1440; DDC2B.
* 1. PS/2 compatible mouse support is for three button (wheel) mice.
2. The Change Device procedure in the Logitech Mouse Ware program does not work in Microsoft NT.

Hardware Requirements

Console

• A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be
using on any of the PCs.
• A PS/2 Style Mouse
• A PS/2 Style Keyboard
PC
Each PC must have:
• A VGA, SVGA, Multisync card or USB port.*
• A 6-pin mini-DIN (PS/2 style).
• Either a 6-pin mini-DIN (PS/2 Style) keyboard port or a USB port.*

Cables

The following are the cables needed to connect your KVM Switch to the CPUs:
P750-006 PS/2 Cable Kit – 6'
P750-010 PS/2 Cable Kit – 10'
P750-015 PS/2 Cable Kit – 15'
NOTE: The wiring and pin assignments will not let you use a Serial-to-PS/2 adapter at the KVM side of the cable.
Attempting to use a standard serial extender cable with adapters at both ends will fail.
* Use a B015-000 PS/2 to USB Adapter to connect a USB computer to the KVM (still requires a P750 series cable kit to
complete CPU connection).
2