Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach Front Stabilizer (No. 21) to
Seat Rail (No. 3) with 2 Bolts (No.
35), 2 Arc Washers (No. 50), 2
Spring Washers (No. 49), and 2
Nuts (No. 38). Tighten and secure
with Spanner (No. 52).
Attach the Rear Stabilizer (No. 2) to
the Seat Rail (No. 3) with 3 Inner Hex
Screws (No. 40), 3 Spring Washers
(No. 49), 2 Flat Washers (No. 46) and
1 Arc Washer (No. 50). Tighten and
secure with Allen Wrench (No. 53).
STEP 2:
Remove 2 Flat Washers (No. 46), 2
Spacers (No. 14) and 2 Inner Hex
Screws (No. 40) from Long Shaft
(No. 8) with 2 Allen Wrenches (No.
53).
Insert Long Shaft (No. 8) into the
Seat Rail (No. 3) and insert 2
Spacers (No. 14) that were removed
onto the Long Shaft (No. 8) on both
ends. Then, slide the Pedals (No.
15L/R) onto each side of the Long
Shaft (No. 8). Secure with 2 Flat
Washers (No. 46) and 2 Inner Hex
Screws (No. 40) that were removed.
Tighten and secure with 2 Allen
Wrenches (No. 53).
Insert the Meter (No. 27) into the
meter support on the Seat Rail (No.
3). Then, connect the link wire of
Sensor (No. 28) with the link wire of
Meter (No. 27).
6
Publicidad
Tabla de contenido
