Maurice Lacroix ML115 Manual Del Usuario Y Garantía página 10

18
4.3 CHRONOGRAPH SETTINGS
4.3.1 SIMPLE TIMING FOR ALL
CHRONOGRAPH WATCHES
1. Press the pusher (II) to start the
chronograph.
2. Press the pusher (II), the chronograph is
stopped and you can read the time
measured.
3. Press the pusher (II) to restart the
chronograph OR press the pusher (III)
to reset to zero.
4.3.2 USING THE QUARTZ CHRONO-
GRAPH FUNCTIONS: Calibre D/E
Timing with intermediate times:
1. After the pusher (II) is pressed,
the counter hands will turn to show
the measured time.
2. After the pusher (III) is pressed to stop the
chronograph, the 60-seconds counter
hand (I), the 30-minutes counter hand (K)
and the 1/10 of a second hand (J) will
stop running and the first intermediate time
measured can be read.
3. Press the pusher (III), the chronograph will
restart and catch up with the elapsed time.
4. Press the pusher (III), the chronograph will
stop running and the second intermediate
time measured can be read.
5. Press the pusher (III), the chronograph will
restart and catch up with the elapsed time.
6. Press the pusher (II) to stop the timing and
read the total time.
7. Press the pusher (III) to reset the
chronograph.
N.B. After starting the chronograph, the
1/10 of a second hand will stop turning
after 30 seconds to save battery life.
Adjusting the chronograph hands to the
zero position:
For example, after a battery change or a
violent shock, one or several chronograph
hands (I), (J) or (K) are not in their correct
zero positions and have to be adjusted.
1. Pull out the crown (I) to position (2).
2. Keep the pushers (II) and (III) pressed
simultaneously for at least 2 seconds.
The second counter hand (J) rotates by
360°. The corrective mode is activated.
3. Adjust the second counter hand (I) by
pressing the pusher (II).
4. Press the pusher (III) to adjust the next
hand.
5. Adjust the 1/10 of a second counter
hand (J) in single steps by pressing the
pusher (II).
6. Press the pusher (III) to adjust the next
hand.
7. Adjust the 30-minutes counter hand (K)
by pressing the pusher (II).
8. Return the crown (I) to position (0).
N.B. The adjustments can be made in
single steps by pressing the pusher (II)
once or continuously by pressing the
pusher (II) non-stop.
4.4 USING THE AUTOMATIC
CHRONOGRAPH FUNCTIONS
Calibre ML57/ML112
1. Press the pusher (II), the counter hands will
turn to show the measured time.
2. Press the pusher (II) to stop the chrono-
graph, the 60-seconds counter hand (I),
the 30-minutes counter hand (K) and the
12-hours counter hand (L) will stop running
and the time measured can be read.
3. Press the pusher (II), the chronograph
will restart OR press the pusher (III),
the chronograph will be reset to zero.
Using the chronograph: do not adjust
!
the pushers (II) and (III) under water to
prevent moisture from getting into the
mechanism.
19