COOL AIR MK-TF0003 Manual De Instrucciones página 2

NOTICE
● Read all instructions before operating this fan.
● This fan is for indoor and household use only and not intended for commercial or industrial use.
● This fan must be placed on an even, horizontal surface with clearance on all sides.
● Never insert fingers, pencils, or any other objects through the fan housing when the tower fan is running.
Unplug the fan when moving it from one location to another.
● DO NOT operate this fan in rooms with bathtubs, showers, swimming pools, washbasins or water connections.
● DO NOT use this fan in a room where there is a danger of explosion in the vicinity of flammable liquids or
gases.
● DO NOT expose the fan to water or other liquids.
● Please take extreme caution to the children near the fan.
● DO NOT connect the fan to a power sources other than a 120V alternating current polarized outlet.
● DO NOT touch moving parts.
● DO NOT use if the fan housing is removed or damaged.
● Only use this fan when you are in good condition. If you are tired, ill, or if you have ingested alcohol,
medication or illegal drugs, do not use this fan, as you are not in a condition to use it safely.
● To reduce the risk of electric shock, DO NOT use the fan by a window.
● This product contains a button battery. If swallowed, it could cause severe injury or death in just 2 hours.
Seek medical attention immediately.
● Pull the plug out if the device is not in use.
● Disconnect the fan before assembling, dissembling or cleaning.
● The rules about cord and plug are as below：
(1) This product employs fuse for overload protection. A tripped fuse indicates an overload or short-circuit
situation. If the fuse trips, unplug the product from the outlet. Replace the fuse as per the user servicing
instructions. If the replacement fuse trips, the product should be discarded or returned to an authorized
service facility for examination or repair.
(2) Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility
for examination and / or repair.
(3) Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not
route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be
tripped over.
● Consult a qualified electrician when there is a loose fit between the AC outlet and plug. It may cause
overheating of the plug.
● Use this fan only as described in this instruction. Any other use not recommended by the manufacturer could
result in electrical shock, fire or injury to person or property and may void the warranty.
WARNING
● The device may only be connected to a socket that is correctly installed and grounded.
● Do not touch the mains plug with wet hands.
● To unplug, always grasp the plug and pull it out from the wall outlet. Do not pull on cord.
● Do not bend, crush, pull or drive over the power cable. Protect the cable from sharp edges, oil, and heat.
● Do not lift the device using the cable or use the cable for purposes other than intended.
● DO NOT use any fan with a damaged cord or plug, after a malfunction, or if it has been dropped or damaged
in any manner.
● To reduce the risk of fire, electrical shock and injury to a person or property, do not connect this product into
extension cords. The extension cord could overheat.
● If using an extension cord is necessary, use a short extension cord that is UL or ETL listed to reduce the
chance of overheating. Do not plug the fan into any devices with connected cord. This includes surge
protectors, multiple outlet adapters, and power strips.
● Check the plug and cable before each use.
● To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device.
Please read and keep these instructions
~2~